補償貿易合同

出自 MBA智库百科(https://wiki.mbalib.com/)

　　補償貿易合同又稱“補償貿易協議書”。不同國籍的雙方當事人就補償貿易方式、方法、基本權利義務等問題簽訂的協議。合同的主要內容通常包括：補償貿易的項目，設備或技術的規格、數量、價格和提供的方式、期限、補償產品的規格、數量、計價辦法，提供的方式、期限、補償貿易中的信貸與擔保、運輸與保險，雙方責任條款和爭議的解決等。數額大、內容複雜的補償貿易合同可有多個合同，即規定雙方當事人基本權利義務與一般事項的總協議書和設備買賣合同、產品返銷合同、貸款協議、培訓協議等。

　　本合同於________年________月________日中國________市簽訂。

　　甲方：中國________公司

　　法定地址：

　　電話：

　　電傳：

　　乙方：________國________公司

　　法定地址：

　　電話：

　　電傳：

　　雙方在平等互利基礎上，通過友好協商，特訂立本合同。

　　第一條 貿易內容

　　（一） 乙方向甲方提供用於生產的________型機械________一各種其他輔助機械設備，並同事提供各類機械設備所必須的附配件及備用件，以及在生產過程中各種必須的測試一起。具體的各類機械設備、測試儀器、附配件、備用件之型號、名稱、規格、數量、價格、包裝要求、交貨期限等，由雙方另行簽訂設備進口公司，作為本合同不可分割的一部分。

　　（二） 甲方用乙方提供的機械設備所生產的部分產品以及其他商品，經雙方協商後，也可用________工廠生產的________ 來償付全部機械設備的價款。具體的償付商品之名稱、數量、價格、交貨期限等，由雙方領行簽訂補償商品供貨合同，作為本合同不可分割的一部分，設備進口合同與補償商品供貨合同可合併為補償貿易購銷合同，見附件。

　　第二條 支付條件

　　由甲乙雙方對開信用證，即由甲方分期開出以乙方為受益人的遠期信用證，分期、分批支付全部機構設備的價款；乙方開出以甲方為受益人的即期信用證，支付補償商品的貨款。甲方用乙方支付補償商品的貨款，來支付全部機械設備的價款。當乙方支付的貨款不能相抵甲方所開的遠期信用證之金額時，其差額部分由乙方用預付貨款方式，在甲方所開的遠期信用證到期前匯付甲方，以使甲方能按時議付行所開的遠期信用證。甲方所開的遠期信用證的按期付款，是基於乙方按規定開出即期信用證幾按規定預付貨款。乙方保證按規定開出信用證及預付。

　　第三條 付款期限

　　甲方用________ 年零________個月，分月用商品償付全部機械設備的價款。償還日期自第一批機械設備到貨後約________個月後開始，原則上每月償還日期自第一批機械設備到貨後約________個月後開始，原則上每月償還的金額是全部機械設備價款的________分之________。甲方可以提前償還，但需在________個月前通知乙方。

　　在甲方用補償商品償還機械設備借款期間，乙方應按本協議項下的有關補償商品合同的規定，開出以甲方為受益人的足額、即期、不可撤消，可分割、可轉讓的信用證。

　　第四條 貨幣

　　雙方商品覺用________幣計價。乙方提供的全部機械設備及所有儀器、附配件用________幣作價，甲方提供的補償商品則按簽訂合同時甲方出口貨物的人民幣作價，以當時的人民幣對________幣的匯率折算為________幣。

　　第五條 利息計算

　　甲方所開的遠期信用證及乙方所預付貨款的利息應由甲方負擔。雙方議定年利息率為百分之________。

　　第六條 技術服務

　　貨物到達甲方口岸後，由甲方自行安裝。但在主要設備安裝過程中，甲方認為需要時，乙方必須派出技術人員進行現場知道，提供必要的技術服務，在此過程中由於技術上的問題，所造成的損失由乙方負責。

　　經雙方協商，為完成此項工作，由乙方派出________數量的技術人員。在中國的一切費用均由乙方承擔。

　　第七條 附加設備

　　在執行本協議過程中，如發現本合同項下的機械設備在配套生產時需要繼續增添新的機械設備或測試儀器時，可由雙方另行協商，予以增訂。增訂的項目仍應列入本合同範圍之內。

　　第八條 保險

　　設備進口後由乙方投保。設備所有權在付清貨款發生轉移後，如發生意外損失先由保險公司向投保人賠付，再按比例退回甲方已支付的設備貨款。

　　第九條 違約責任

　　乙方不按合同規定購買補償商品或甲方不按合同規定提供商品時，均應按合同條款承擔違約責任，賠償由此造成的經濟損失，並向對方支付該項總值的________%的罰款。

　　第十條 履約保證

　　為保證合同條款的有效履行，雙方分別想對方提供由各自一房銀行出具的保函，予以擔保。甲方的擔保銀行為中國銀行________分行，乙方的擔保銀行業________國________銀行。

　　第十一條 合同條款的變更

　　本合同內容如遇特殊情況需要變更，須經雙方協商一致。

　　第十二條 不可抗力

　　合同一方對由下列原因而導致不能或暫時不能履行全部或部分合同義務的，不承擔責任：水災、火災、地震、乾旱、戰爭或其他任何在簽約時雙方不能預料、無法控制且不能避免和剋服的時間。但該放應儘快地將所發生的時間通知對方，並應在時間發生15天內將有關機構出具的不可抗力時間的證明寄交對方。如果不可抗力時間之影響超過120天，雙方應協商 合同繼續履行或終止履行的事宜。

　　第十三條 仲裁

　　因履行本合同所發生的一切爭議，雙方應友好協商解決，如協商仍不能解決爭議，則應將爭議提交中國國際經濟貿易仲裁委員會（北京），依據其仲裁規則仲裁，仲裁裁決是終局的，對雙方都有約束力。仲裁費應由敗訴一放承擔，但仲裁委員會另有裁定的除外。

　　在仲裁期間，除仲裁部分之外的其他合同條款應繼續執行。

　　第十四條 文字、生效

　　本合同用中文和英文寫成，兩種文字具有同等效力。上述兩種文字如有不符，以中文為準。

　　本合同自簽字之日起生效，有效期為________年。期滿後，雙方如願意繼續合作，經向中國政府有關部門申請，獲得批准後，可延期________年或重新簽訂合同。

　　甲方：

　　中國________公司代表

　　（簽字）

　　乙方：

　　________國________公司代表

　　（簽字）

　　見證人：

　　中國________律師事務所律師

　　（簽字）

　　Compensation Trade Contract

　　This contract is hereby made and entered into between ________Co.(hereinafter referred to as Patty A)and________Co.(hereinafter referred to as Praty B)this________day of________,________,in________,China, adhering on the principle of equality and mutual benefit and through amicable consultation.

　　Party A: ________Company, China.

　　Address: ________

　　Tel: ________

　　Telex: ________

　　Party B: ________ Company, ________

　　Address: ________

　　Tel: ________

　　Telex: ________

　　Article 1 Introduction

　　a) Party B shall provide Party A with ________machines of model ________to be used in production.Along with them shall also be provided various kinds of supporting machinery,accessories and spare parts it needs,and the various kinds of measuring and testing instruments required in the course of production,The specific models, names,specifications, quantity,unit prices,packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties,which will serve as a integral part of the contract.

　　b) The total cost of the entire machinery and its supporting equipment shall be paid to Party B of the part of the products and/or other commodities produced by Party A with the machinery supplied by Party B.It may also be paid to Party B of (a certain product)turned ort by .(This practice is hereinafter referred to as a make-up payment).The specific names,quantity and unit price of the products to be delivered as make-up payment,and the deadline for delinery,are to be specified in an additional contract between the two parties on products-supplying as make - up payment,which shall be the integral part of the contract.The two additional contracts mentioned above may be merged as one called buy - and sell contract on compensation trade.

　　Article 2 Terma of Payment

　　The two parties shall open a L/C in favour of each other.I.e.Party A shall open,at regular intervals,long-term L/C in favour of Party B to pay in install ments the entire cost of the machinery and its support sight L/C in favour of {arty A as a payment for the cost of the products to be delivered by Party A.Party A shall pay for the total cost of the machinery and its supporting equipment with the sum of money which Party B shall pay the products to be delivered by Party A as a make - up payment.In case the money to be paid by pairy B is not enough to cover the value of the long - term L/C is determined by the at - siggt L/C opened by Party B and its down payment as stipulated in the contract .Party B grarantees to fulfil what is required of it to do as mentioned herein.

　　Article 3Deadline for Payment

　　Party A shall pay the total cost of the machinery and its supporting equipment supplied by Party B by delivering the products it produces to Party B as a make - rp payment on a month - to - month basis , and pay is off within a preriod of ________ years and ________months.The payment shall start approximately ________ months after the first delivery of the machinery is made .In principle,the sum to be paid per month shall be ________ percent of the total amount due to be paid for the machinery Party A can make its payment ahead of schedule with a notice given to Party B ________ months in advance.During the compensation period ,Party B shall open a L/C in favour of Party B,covering the total amount , at sight , irrevocable , divisible and assignable ,in accordance with the relevant provisions in the buy - and - sell contract on compensation trade.

　　Article 4 Currency for Pricing

　　Products provided by either party shall be priced in terms of________.All the items supplied by Party B,including machinery ,the required apparatus,accessories and spare parts shall be priced directly in terms of ________ above mentioned ;while the products provided by Party A as a make - up payment for the machinery supplied by Party B shall be first priced in terms of RMB as orher similar exports at the time the contract is made and then the prices in RMB shall be turned into those in ________ above mentioned according to the current exchange rate at the time.

　　Article 5 Interest Rate

　　Party A shall pay the interest on its long - term L/C and the down payment of Party B.The annual interest rate is agreed upon at ________%.

　　Article 6 Technical Service

　　After arrival at the destination port,the machinery shall be assembled by Party A.When Party A believes it is necessary ,Party B shall send its technicians to provide on-the-spot instructions and other required technical assistance during the course of assembling. Party B shall be liable for the losses incurred in the coures fo assembling as a result of technical default of its prat.

　　After approval by both parties, Party B shall send a group of technicians to China to faciliate the completion of the project. The cost incurred in China shall be borne by Party B.

　　Article 7 Additional Equipment

　　In the course of implementing the contract if it is foun necessary that ,in addition to the machinery and accessories already listed in the provisions, some additional items of the equipment and measuring and testing apparatus are needed, an additional order shall be agreed upon through negotiation .The items thus added shall be incorporated in the contract.

　　Article 8 Insurance

　　After being delivered in China, the machinery and its supporting equipment shall be insured by Party B. The unforeseen losses in connection with the equipment shall be indemnified for by the Insurance Company first to the insurer (Party B) in case the equepment has already been paid off for and thus transferred into Party A's possession.Then a proportional part of the sum paid by the Insurance Company shall be allotted to Party A to cover the payment Party A has already made for the items of equipment involved the losses.

　　Article 9 Liability for Breach

　　Either party shall be liable for a breach of contract in accordance with the provisions in the contract and shall indemnify for all the losses thus if Party B should fail to make purchase of the products to be delivered by Party A as make - up payment , or Party A should fail to deliver the products for compensation . In such case, the breaching party shall pay to the other a sum as a fine , which shall account for ________ % of the total cost the products in question.

　　Article 10 Performance Guarantee

　　To guarantee the implementation of the contract, each party shall submit to the other a performance guarantee issued by a bank agreed by both parties. The guarantee bank of Party A is Bank of China, while that of Party B is ________ Bank.

　　Article 11 Amendment of the Contract

　　When the contract needs to be amended in certain particular cases, the amendment can be effected only after it is agreed upon by both parties through consultation.

　　Article 12 Force Majeure

　　Either party shall not be held resposible for failure or delay to perform all or any part of the contract due to flood, fire earthquake , drought , war or any other events which coule not be predicted at the time of the conclusion of the contract, and could not be controlled, avoided or overcome by the parties. However,the party effected by the Event of Force Majeure shall inform the other party of its occurrence in written as soon as possible and thereafter send a certificate of the Event issued by the relevant authority to the other party but no later than 15days after its occurrence.

　　In the Event of Force Majeure last over 120 days, both parties shall negotiate the performance or the termination of the contract.

　　Article 13 Arbitration

　　All disputes arising from the performance of this contract should be settled through friendly negotiations. Should no settlement be reached through engotiation, the case shall then be submitted for arbitration to the China International Economic and Trade Arbitration Commission(Beijing) and the rules of this Commission shall be applied. The Arbitration fee shall be borne by the losing party unless otherwise awarded by the arbitration organization.

　　In the Event of Force Majeure last over 120 days, both parties shall negotiate the performance or the termination of the contract.

　　Article 13 Arbitration

　　All disputes arising from the performance of this contract should be settled through friendly negotiations. Should no settlement be reached throuhg engotiation, the case shall then be submitted for arbitration to the China International Economic and Trade Arbitration Commission(Beijing)and the rules of this Commission shall be applied. The Arbitration fee shall be borne by the losing party unless otherwise awarded by the arbitration organization.

　　During the course of the arbitration, the contract shall be performed except for the part under arbitration.

　　Article 14 Language and Effective Date

　　The contract shall be written in Chinese and in English. Both languages are equally authentic. In the events of any discrepancy between the two abovementioned versions,the chinese version shall prevail.

　　The contract shall become effective when the contract is signed by both parties. the effective period of the contract shall be years. based on the willingness to continue the contract, both parties shall submit a application to relavant department of Chinese government for the extension of the contract or reach a new contract when the contract expires.

　　PartyA : (signature)on behalf of (company)

　　PartyB: (signature)on behalf of (company)

　　Witnessed by (signature)